Re: [MW:22603] TG-X flux core TIG rod

Buddy...Slag by GTAW process.... You sure?

On Dec 17, 2014 10:14 PM, "Pravin Poornachandran" <htcispravin@gmail.com> wrote:

Dear Expert,

I'm having issue on removing slag on root pass welding for stainless steel pipe welding

Welding condition:

Material: SS 316L

Thickness: 4-5mm

Bevel angle: 65 deg

Root opening: 3-4mm

Root face: 1mm

Pipe dia: 4 inch

I'm using KOBELCO TG-X316L FCW TIG rod, special consumable which can eliminate back purging which save cost on Ar.

However, it is difficult to remove slag on inside the pipe.

Kindly advice if anyone have experience using TG-X from KOBELCO and how to remove the slag inside the pipe.

Best regards,

Pravin Poornachandran

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.