Re: [MW:22602] TG-X flux core TIG rod

BEGIN:VCARD
X-LOTUS-CHARSET:UTF-8
VERSION:3.0
PRODID:-//Lotus Development Corporation//NONSGML Notes 8.5.2//EN_C
FN:George H Dilintas/GRC/VERITAS
N:Dilintas;George;;;
ADR;TYPE=WORK;TYPE=PREF:PIRAEUS;;23\, Etolikoy Str.;PIRAEUS;;185 45
;GREECE
ADR;TYPE=HOME;TYPE=PREF:;;19-21 B. Laskou str.;Athens;Attika;11 633
;Greece
TEL;TYPE=HOME:+30-1-7667 197
TEL;TYPE=WORK:+30-210-40 63 113
TEL;TYPE=HOME;TYPE=FAX:+30 - 1 - 7667 197
TEL;TYPE=WORK;TYPE=FAX:+30-210-40 63 118
TEL;TYPE=CELL:+30 -69 44-64 62 04
EMAIL;TYPE=WORK;TYPE=PREF;TYPE=INTERNET
:george.dilintas@gr.bureauveritas.com
ORG:Bureau Veritas;Industry
REV:20131201T024559Z
END:VCARD

you may use chemical milling

best regards

Dr. Georgios Dilintas

Authorized Nuclear Inspector
Authorized Inspector Supervisor


I&F REGIONAL TECHNICAL MANAGER
BUREAU VERITAS HELLAS

Tel: +30 210 40 63 113/4
Fax: +30 210 40 63 118
Cell: +30 69 44 64 62 04
(See attached file: Dilintas_George.vcf)

Pravin Poornachandran ---18/12/2014 06:15:05---Dear Expert, I'm having issue on removing slag on root pass welding for stainless steel

From: Pravin Poornachandran <htcispravin@gmail.com>
To: materials-welding@googlegroups.com
Date: 18/12/2014 06:15
Subject: [MW:22594] TG-X flux core TIG rod
Sent by: materials-welding@googlegroups.com

---

Dear Expert,

I'm having issue on removing slag on root pass welding for stainless steel pipe welding

Welding condition:
Material: SS 316L
Thickness: 4-5mm
Bevel angle: 65 deg
Root opening: 3-4mm
Root face: 1mm
Pipe dia: 4 inch

I'm using KOBELCO TG-X316L FCW TIG rod, special consumable which can eliminate back purging which save cost on Ar.

However, it is difficult to remove slag on inside the pipe.

Kindly advice if anyone have experience using TG-X from KOBELCO and how to remove the slag inside the pipe.

Best regards,
Pravin Poornachandran

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com