Slow cooling under argon cover will reduce chances of Oxidation and cracking.
S.Nn.Bagchi
On Thursday, December 11, 2014 5:42 PM, 'GOPU NAIR' via Materials & Welding <materials-welding@googlegroups.com> wrote:
Dear SekharWhat is important for Ti welding is the Cleanliness. A dust free atmosphere, clean surface and consumables and the right parameters shall produce a good quality welding. A change of 5deg C temperature due to AC is not going to make any difference to weld quality but may add to welding machine operator's productivity.Good luckGopal
From: 'b shekar' via Materials & Welding <materials-welding@googlegroups.com>
To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com>
Sent: Thursday, 11 December 2014 2:08 PM
Subject: [MW:22542] Re: Titanium tube welding and cooling time required
--Dear Sirs,What might be the temperature at the time of fusing the 0.7 mm thk tube by tungsten rod against the titanium tube sheet.BVNR Sekhar
Senior Manager
Thermal Powertech Limited
Nellore, A.P.
Mob:+917680023063
sekhar.batlanki@tpcil.com
From: b shekar <bvnrshekar@yahoo.co.in>
To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com>
Sent: Thursday, 11 December 2014 2:05 PM
Subject: Titanium tube welding and cooling time required
Dear Sir,We have Titanium tube of Dia. 25*0.7 thk tubes for condenser. A titanium layer of 5mm upon the carbon steel plate on which these tubes were cut to surface size of 0.5 mm protruding, later expansion 5-6% of the 0.7 mm thk tube there by seal welding with orbital welding machine.What i want to know is there any cooling time required for the tube to be welded and the heat dissipated on the main tube sheet requires any cooling by Air Conditioning or natural cooling. In the earlier projects of 9 units we have never used the AC but, in this project the QC asked to use AC. I am worried of cracks and concern about using AC which immediately cools down the weld bead or titanium sheet resulting a cracks or repair.kindly suggest me.BVNR Sekhar
Senior Manager
Thermal Powertech Limited
Nellore, A.P.
Mob:+917680023063
sekhar.batlanki@tpcil.com
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Comments