Pls. see ASME Sec II Part A : 2010 SA 20 Para 13.1.1, Para 12.1.7 and SA 770 Para 6.
In short: Heat Treated: low temperature Charpy V- notch impact tested: through thickness tension tested
Regards,
From: "g.venkatesan06@gmail.com" <g.venkatesan06@gmail.com>
To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com>
Date: 28-06-2012 13:54
Subject: [MW:14709] Explanation of MTLTV ZT-Reg
Sent by: materials-welding@googlegroups.com
Dear sir.
I saw one carbon steel MTC SA 537 CL 1 MTLTV ZT.
What is the explanation of MTLTV ZT.
Which source or code gives that explanation.
Kindly guide me.
Regards
venkat
trichy
----------
Sent from my Nokia phone
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Subscribe to:
Post Comments (Atom)
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment