Re: [MW:14601] Argon gas consumption for GTAW

The gas flow rate depends on the material, thickness and amperage. It can be from 5 LPM (thin sections and low amperage) to 12 LPM (large thickness and high amperages)

Cumprimentos

Rui Fernandes Pinho
Divisão de Gases Industriais
Desenvolvimento de Aplicação de Gases

Linde Sogás, Lda.
Travessa Joaquim Dias Salgueiro, Nº 44
4470-416 Vila Nova da Telha, Portugal
Phone + 351 22 999 8380, Fax: + 351 22 996 4039
Mobile + 351 91 473 9197
rui.pinho@pt.linde-gas.com, www.linde.pt



From:        Nayan <nsurkar31@gmail.com>
To:        materials-welding@googlegroups.com
Date:        19-06-2012 10:01
Subject:        [MW:14587] Argon gas consumption for GTAW
Sent by:        materials-welding@googlegroups.com

---

Dear All,

Actually I would like to know How much the Argon gas require during GTAW welding.

In my plant we are going to weld 45000 different sizes joints. can you tell me that is thre any standard or approx method to measure the consumption of the shielding gas(Ar)

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.