Thursday, June 21, 2012

[MW:14626] Permissible variation in the yield strength

Dear Experts,
 
We have a report of different yield strength values for the same material (one material is divided into different specimens) and the variation observed is about 5%. But the difference in Tensile strength of the same material is within 1%.
What is the permissible variation in yield strength of a material (say for example: Mild steel grade AISI 15XX), Code or standard reference , if any and what is the reason.
 
Regards,
Megnath
By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:35346] Cast-iron welding

Any advice for cast iron welding Sent from Yahoo Mail for iPhone

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...