Hi,
For each welding consumable brand like Esab, Hyundai, Lincoln, the manufacturer recommends for its storage conditions.
But for SMAW electrodes, U can refer ASME-II C, SFA 5.1, Table A3 for your knowledge.
For SAW flux, refer welding consumable manufacturer's catalogue for drying and holding conditions, for each type of Flux.
Hope it is ok.
Best Regards,
Sarav,
Korea
On Mon, Jun 25, 2012 at 1:31 AM, Tariq Hussain <tariqhussain632@gmail.com> wrote:
Dear Experts,--Kindly Provide Your Valuable View on Below Queries.1. What is Recommended Procedure / Conditions for storage of MMA electrodes, SAW Wire Spools, TIG Wires & SAW Fluxes in term of Consumable Storage Room Temperature & Relative Humidity?
2. What to do if we could not maintain the Required Consumable Storage Room Temperature and Relative Humidity?
Thanks & Regards
Tariq Hussain
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment