Dear Bhavesh,
The 3.2 Certification requirements have to be agreement with Client as per the project requirement and this can be clearly identified in an Inspection Test Plan with all details. Basic: 1. The 3.2 Certification requires an external party to check, verify and produce a Certificate. 2) A full traceability of all records ie, MTCs, Lad Reports, Test Reports etc... shall be required and make sure that if there is any Client specific requirement then this too has to be put in the Quality/Test Plan.
I do not think that EN 10204:2004 states all the requirement for a 3.2 Certification but as a min. the chemical & mechanical property results shall be produced in Certificate.
Thanks & Regards
Vino-Doha
On Wed, Jun 20, 2012 at 8:22 AM, <Bhavesh.Hansora@dnv.com> wrote:
--Dear One,
Can I know what is the requirement for 3.2 certification ??
Which are the tests to be witness by inspector ?
Bhavesh Hansora
-----------------------------------
************************************************************************************** The contents of this e-mail message and any attachments are confidential and are intended solely for the addressee. If you have received this transmission in error, please immediately notify the sender by return e-mail and delete this message and its attachments. Any unauthorized use, copying or dissemination of this transmission is prohibited. Neither the confidentiality nor the integrity of this message can be vouched for following transmission on the Internet. **************************************************************************************
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Comments