[MW:14668] RE: 14588] FERRITE PERCENTAGE

Hi CHIRANJEEVULU,

What're the ferrite reading in question?

Appreciate your reply.

Thanks

Pradip Goswami,P.Eng.IWE
Welding & Metallurgical Specialist
Ontario, Canada.
Email-pgoswami@sympatico.ca,
pgoswami@quickclic.net

-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of Temburu
Chiranjeevulu
Sent: Tuesday, June 19, 2012 3:11 AM
To: Materials & Welding
Subject: [MW:14588] FERRITE PERCENTAGE

Dear Expert,


If A312TP321 material will get ferrite % more than
required,what will happend during stabilization heat treatment, and why we
have to check ferrite% before stabilization heat treatment.



Regards,
T.CHIRANJEEVULU.
ENGINEERS INDIA LTD
ENGINEER-WELDING/NDT
OPAL PROJECT,DAHEJ.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to
materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and
meant for educational purposes only, Users must take their own decisions
w.r.t. applicable code/standard/contract documents.


--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.