Skip to main content

Re: [MW:14637] Jack screw flange

By Materials & Welding
Pls find attached Aramco Standard drawing for the Jack screw will serve you the detail information,
 
Warm Regards'
Rafeeq Ur Rahman

From: Gurunath.Hanamar <guru.h10@gmail.com>
To: materials-welding@googlegroups.com
Sent: Tuesday, 19 June 2012 1:23 PM
Subject: Re: [MW:14595] Jack screw flange

Dear sir,
But what will be the hole size to be drilled & orientation as per standards.
Thanks & Regards,
Gurunath Hanamar
On 19 Jun 2012 15:02, "Shrichand Bathv" <shrichand.bathv@gmail.com> wrote:
>
> Dear Gurunath, 
>
> As Per Saudi Aramco Standard Drawing , Make A Drill on WNRTJ flange as per Standard Drawing .
>
> It is acceptable .
>
> Thanks 
> Shrichand G Bathv
> 0545232074
>
> On Tue, Jun 19, 2012 at 11:53 AM, Gurunath.Hanamar <guru.h10@gmail.com> wrote:
>>
>> Dear All,
>> Please can you people help me. This is regarding WNRTJ flange with jack screw. As per drawing requirement, flange with jack screw is required but due to non availability of flange with jack screw hole my vendor have drilled jack screw hole by himself on WNRTJ flange. Is it acceptable?
>>
>> Could you people help me out, as B16.5 doesn't have hole details to be drilled on flange.
>> Please give details regarding WNRTJ flange with jack screw & relevant standards.
>>
>> Thanks & Regards,
>> Gurunath Hanamar
>>
>> --
>> To post to this group, send email to materials-welding@googlegroups.com
>> To unsubscribe from this group, send email to mailto:materials-welding%2Bunsubscribe@googlegroups.com
>> For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>> The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>
>
>
>
> --
>>
>> Your Immediate Response will be Highly Appreciated.
>>
>> THANKS & REGARDS...
>> Shrichand Bathv
>>
>> 00966 545232074
>>
>> Dammam ,Kingdom Of Saudi Arabia
>>
>>
>> Skype Name : shrichand.bathv
>> Yahoomassenger : shrichand_bathv1986
>> Twitter  : shrichandbathv
>> Linkedin Name : Shrichand Ghanshyam Bathv
>> Facebook Name : Shrichand Ghanshyam Bathv
>> Nimbuzz : shrichand.bathv
>> Fring : shrichandbathv
>>  --------------------------------------------------------
>
>   "Success doesn't come to you... you go to it. "
>
>     --------------------------------------------------------
>
>  P Please consider the environment before printing this mail note.
>
> Save a tree… please don't print this document unless you really need to!!
>
>  The contents of this email, including all related responses, files and attachments transmitted with it (collectively referred to as "this Email"), are intended solely for the use of the individual/entity to whom/which they are addressed, and may contain confidential and/or legally privileged information. This Email may not be disclosed or forwarded to anyone else without authorization from the originator of this Email. If you have received this Email in error, please notify the sender immediately and delete all copies from your system. Please note that the views or opinions presented in this Email are those of the author . The recipient should check this Email and any attachments for the presence of any viruses. I accepts no liability for any damage caused by any virus/error transmitted by this Email.
>
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to mailto:materials-welding%2Bunsubscribe@googlegroups.com
> For more options, visit this group's bolg at http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.


Comments

Post a Comment

Popular posts from this blog

Materails FAQs

By Materials & Welding
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...
21 comments
Read more

Heat tint (temper) colours on stainless steel surfaces heated in air // Heat tint

By Materials & Welding
Introduction The colour formed when stainless steel is heated, either in a furnace application or in the heat affected zone of welds, is dependent on several factors that are related to the oxidation resistance of the steel. The heat tint or temper colour formed is caused by the progressive thickening of the surface oxide layer and so, as temperature is increased, the colours change.   Oxidation resistance of stainless steels However, there are several factors that affect the degree of colour change and so there is no a single table of colour and temperature that represents all cases. The colours formed can only be used as an indication of the temperature to which the steel has been heated. Factors affecting the heat tint colours formed Steel composition The chromium content is the most important single factor affecting oxidation resistance. The higher the chromium, the more heat resistant the steel and so the development of the heat tint colou...
Post a Comment
Read more

Re: [MW:10788] ON PLOT PIPING & OFF PLOT PIPING

By Materials & Welding
Piping systems involved for the flow lines and gathering lines from the well head isolation valve to the production facility or processing plant isolation valve are determined as OFF PLOT. ON PLOT defines piping system in the processing plant and production platform. ANSI/ASME B31.4 applies for off plot piping system. B31.4 allows the use of either API 1104 or ASME section IX (as appropriate). However, occasionally, a very small system such as piping within 500 feet of a processing plant (some client also said 400 feet) may be declared B31.3 rather than B31.4. When B31.3 is invoked, only ASME Section IX is used. before you decide which code to use for welding procedure and/or welder qualification for pipe welding, you have to know the design and construction code applicable to the system. Please read far enough into scope and diagram illustrating the application of either B31.3 and B31.4 hope this helps rgds 2011/4/21 pradip kumar sil < pradipsil@gmail.com > Dear all, ...
Post a Comment
Read more