Re: [MW:14650] Impact WPS P1G1 to P1G1 &P1G2 to P1G2 Qualified P1G1 to P1G2 with impact ?

1.NO
2.YES

On Fri, Jun 22, 2012 at 4:44 PM, samshuddin k <sam.renja@gmail.com> wrote:

1. No
2. Yes

On 6/22/12, mohd <mohd52100@gmail.com> wrote:
> Dear experts,
>
> Dear Expert,
>
> 1)Two PQR P1 G1 to P1 G1 & P1 G2 to P1 G2 with imapct, Qualified
>
>  WPS With Impact P1G1 to P1G2 Ans : Yes Or NO.
>
> 2) PQR P1G1 to P1G2 with Impact,Qualified Following WPS,
>
>    a) P1G1 to P1G1 with Imapact  Ans Yes Or NO
>    b) P1G2 to P1G2 with Impact   Ans Yes or No.
>
> I thinks these answer more clarified Mr lalit Querry.
>
> Thanks,
> Mohd.
>
>
> On Jun 21, 9:47 am, LALIT VADADORIYA <lalit.vadador...@gmail.com>
> wrote:
>> Dear expert,
>>
>> If welding procedure is qualified for the SA 516 Gr.60 to same (P No.1
>> Group 1 to same), then is it required to conduct another PQR for the SA
>> 516
>> Gr.70 to same (P No.1 Group 2 to same), if impact requirement is
>> applicable
>> for both material at same temperature?
>>
>> --
>> Regards
>>
>> *Lalit Vadadoriya
>> Sr.Engineer (Inspection)
>> Engineers India Limited*
>> *Dahej Petrochemical Complex,*
>> *Dahej (Gujarat)*
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.