Hi,
Titanium has similar formability as austenitic stainless steel. Please see some texts on forming recommendations of Titanium, from RMI Titanium and Timet. Usually a reliable and forming shop should be chosen, a written procedure should be evaluated and if budget permits, a small forming mock up is advisable.
Thanks.
Pradip Goswami,P.Eng.IWE
Welding & Metallurgical Specialist
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Prakash Hegde
Sent: Wednesday, June 20, 2012 6:09 AM
To: materials-welding@googlegroups.com
Subject: [MW:14614] Titanium Dished End Forming
| Dear Friends I have aquerry about Titanium Gr 2 material D/E of 10mm thk forming i) What are the precautions to be taken during Forming of Titanium Dished End in cold to avoid crack b) Is it advissible to form in cold? ii) If it is to be formed in Hot condition what is a recomended temp and what should be treatment require to be given after forming i.e. renormalising If so , is it required to foerm in Controlled atmosphere Regards Hegde P.B. |
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment