Dear Mr. Satish, Please refer below extracts of UW-51 (a) of ASME Sec. VIII Div. 1
(2) A written radiographic examination procedure is not required. Demonstration of density and penetrameter image requirements on production or technique radiographs shall be considered satisfactory evidence of compliance with Article 2 of Section V. Thanks & regards, C. R. GANDHI
--- On Mon, 4/23/12, Satish Patel Manubhai <satish19183@yahoo.co.uk> wrote:
From: Satish Patel Manubhai <satish19183@yahoo.co.uk>
Subject: [MW:14139] Thickness range for radiography techniqu qualification
To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com>
Date: Monday, April 23, 2012, 2:21 PM
Dear all, Good afternoon. As per section V we have to go for procedure qualification before the start the radiography in job. Is there any group range for dia and thickness for the procedure qualification or we have to go for all individual dia and thickness. Kindly advise and also give reference code for the same. Regards, satish patel -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment