Dear Mr. Darshan, As per QW-403.6 & QW-403.8 of ASME Sec. IX, if PQR will be done on 6 mm. thk. P -1, G-1 material, your qualified base metal thk. range shall be minimum 6 mm. to max. 12 mm. Kindly check for PWHT- Normalizing. Thanks & regards, C. R. GANDHI
--- On Thu, 4/19/12, Darshan Maheshwari <darshan.maheshwari@yahoo.com> wrote:
From: Darshan Maheshwari <darshan.maheshwari@yahoo.com>
Subject: [MW:14126] regarding- thickness range for LTCS piping material for WPS
To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com>
Date: Thursday, April 19, 2012, 11:12 AM
Can any body suggest what thickness range is applied for qualifying a WPS (for thickness 7.11mm) for LTCS piping material. Please provide reference also. Regards,
Darshan Maheshwari. -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment