Please specify the ASTM specification,grade and component (such as valve body pipefittings etc..,) of the material for which weld repair is required so that we can suggest you.
With regards
Ramasamy
On Tue, 24 Apr 2012 18:54:44 +0530 wrote
>
Dear All
Appreciate if someone can explain the procedure and limitation for weld repair or built up by weld of forging material due to machining error.
Does stress relieved (PWHT) shall be carried out after complete weld if the depth is below 10mm?
Thanks
Ghafor Mohamad
--
>
To post to this group, send email to materials-welding@googlegroups.com
>
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>
 |
| Follow Rediff Deal ho jaye! to get exciting offers in your city everyday. |
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment