Wednesday, April 4, 2012

[MW:14056] tapering the thickness to match with approx. 4.5/4.4mm

Could you please give ME your advice to carry out  welding of 7 mm thick CS WN flange by tapering the thickness to match with approx. 4.5/4.4mm thick solid incolloy 8" Pipe. And which clause in AMSE B31.3 mentioned if it is allowed

 

 

Thanks

For:  Kareem

 

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:35354] Cast-iron welding

1. Preheat joint area(other area, cover with mineral wool). 2. ENiCi or ENiFe-CI. 3. stringer bead. 4. peening is to be done on weldmetal im...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...