ALL ASME code didn't specify such requirement....Weaving should be limited to three times the dia of the electrode..besides the Heat input,the resulting residual stress will be less.
2012/4/15 kannayeram gnanapandithan <kgpandithan@gmail.com>
as per section 9, there is no restriction, but in construction code
like section 8,UCS in repair welding it weaving width is restricted
4Xcore dia of smaw electrode. it is good engineering practice to
restric weaving width to reduce heat input, and welder fatigue
Pandithan
Cethar limited
> We generally mention in WPS/PQR weaving of Electrode should be *three
> times*the Electrode dia...I have query is Code restrict for this
> ,anywhere
> written in code aur it is on general experience...
>
>
> Thanks & Regards
> Mohit Aggarwal
>
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Devin Xiu
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment