Re: [MW:14075] Impact test report of PTC

Dear Shadab, salam   We have welded PTC with qualified wps with E70S2 @ minus 48deg C,   Test was carried out for weld,   Ali     -------Original Message-------   From: Shadab Ansari Date: 05/04/2012 09:44:27 To: materials-welding@googlegroups.com Subject: Re: [MW:14064] Impact test report of PTC   Dear Ali, The consumable for tig Filler metal ER70S2 is not suitable for impact test @-48 degrees. Also want to know the heat input and location of charpy impact test. Regards Shadab On Apr 5, 2012 7:50 AM, "Aly" <mhaskar.aly@gmail.com> wrote: Low temp vessel PTC for head to shell c-seam; Head : Cap SA420WPL6, Pipe: SA333 Gr 6; Filler metal ER70S2+ E7018-1; GTAW+ SMAW process.   PTC used as filler metal is not SFA classified for low temp -48deg C   Impact test results: 18, 14, 12 Joules test piece size 10 x 7.5 x 55 @ -48deg C;   Average value required for 10x 7,5x55 is 15joule; single specimen 2/3 x 15: 10joule   Reference ASME SEC VIII Div-1 2011a UG 84 & UCS 67   Dear Expert, Let me have your advice whether these results are acceptable.   Thanks Aly   -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents. -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.