edition, I understand you requirement of 2001 edition for BPV 2007
edition code stamp users)
What is ASNT CP-106-2007 (is it a replica of ISO9712)?
I am still not clear why CP 189 or CP106 are being published by ASNT
when SNT-TC-1A is simultaneously revised?
-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of Bathula
Raghuram (Mumbai - PIPING)
Sent: Wednesday, July 02, 2008 12:55 PM
To: materials-welding@googlegroups.com
Subject: [MW:886] RE: 885] comparison between CP189 and Snt-TC-1A (
2001editions)
I would like to know why you need two different documents (off course
one is a standard and the other is a recommended practice)
-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of RAGHAVENDRA
PEMMARAJU
Sent: Wednesday, July 02, 2008 10:47 AM
To: materials-welding@googlegroups.com
Subject: [MW:885] comparision between CP189 and Snt-TC-1A ( 2001
editoins)
Dear Group members,
Could any one of you pl.provide the comparision of the above two
documents if already worked out!
regards,
Raghavendra
Larsen & Toubro Limited
www.larsentoubro.com
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---
Comments