[MW:899] Re: Comparision of UT & RT ( Justifying UT )

His, Sachin

 

Thanks for reply.

 

There is requirments in contractual documnets of project. I am talking about Hydro power project. It include components like  Turbine,Generator, Valve etc..

 

Normaly the grade of material for plate - A516, A283,SS304 ( Thickness renging from 10 to 250mm ) & Casting - A743 CA6NM  

 

We never conduct RT in manufacturing yet. So to convince client we required general comoparison stating to UT against RT.

I am great thanksful if you can provide the comparision considering below factor. cost,time dellivery ( OTD ),Saftey,sensitivity etc..

 

Revert back soon , Queries are invite

 

Thanks,

 

Vikas Rana

On 4 Jul 2008 12:23:38 -0000, sachin sankhe <sachin.sankhe@rediffmail.com> wrote:

 
Dear Vikas,

You have ask question in very broad prespective.

Their are many reason to say RT is better that UT.

But to convice exactly opposite to your client you need to give some more details like

1.Type of material i.e pipe or plate
2.Size-Thickness,Dia.....

Above all design code

Note that if design code ask for RT then in no way u can escape from RT unless code give relaxation in case of joint whose RT is not possible due to complex joint configuration.

Regards
Sachin


On Fri, 04 Jul 2008 Rana Vikas wrote :

>Dear All,
>
>We awared Hydro power project. There is specifically requirments of NDT
>method RT for all weld joint ( i.e for all class of joint ).
>
>We never used RT in normal practice for all project. Now for convince to
>client We required comparision sheet between RT & UT to justifying UT is
>better than RT.
>
>Request to send Comparision of RT & UT. Please send comparision & revert
>back soon. We have to submitt QAP urgentely.
>
>
>Regards,
>
>Vikas Rana
>
>>

Sachin.Sankhe
Engineer-Inspection
Aker Kvaerner-Malaysia
Mobile:012-2896901
Email1:Sachin.Sankhe@akerkvaerner.com
Email2:Sachin.sankhe@rediffmail.com


--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

Subscribe to: Post Comments (Atom)

[MW:35346] Cast-iron welding

Any advice for cast iron welding Sent from Yahoo Mail for iPhone

• Materails FAQs

  Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
• RE: [MW:5585] Buttering of weld joints

  Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
• 

  WELD AND WELDING SYMBOLS

  Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...

Search This Blog