Skip to main content

[MW:961] Re: Material equivalent software

By Materials & Welding

Mr. Sachin,

This  group is not the place to share copyright materials and a place to request contents of standards or material standards and company proprietary materials. So go thro' the blog whose link is given in the footer of the email before raising questions.

Secondly, do not ask nonsense questions like breaking the softwares in this group.  If you are an engineer you will be able to appreciate the effort behind such tools and the number of people behind such tools. If you feel it is helpful and useful to you or your company, you or your company should affort to pay the price for such compilation effort.

More important understand the purpose of this group. Else you may be bared from this group. So ask the right questions and get the best advice from the material & welding experts in the group.

Use the right effort for the right purpose.

Kannan.



"sachin sankhe" <sachin.sankhe@rediffmail.com>
Sent by: materials-welding@googlegroups.com

22/07/2008 14:18

Please respond to
materials-welding@googlegroups.com
To
materials-welding@googlegroups.com,
cc
Subject
[MW:960] Material equivalent software





 
 
Dear Friends,

At times we come across situation where due to unavailabiity of certain material we have to search equivalent material.
Its time consuming process to find equivalent material.

I just found one of the software which can find equivalent material for almost all countries standards.

Please copy paste below link

http://www.ourmetals.com/index.php?t=06&c=england&cat=13&subcat=116&step=4&rid=14&rid2=0&rid3=5

However this software is not free.Hope ,if any one can find crack for it?Please let me know if you can.

Also results of query for equivaqlent material is shared free on site which we can make use of it,if we are lucky enough to get our choice of material

Please copy below link to see results of query raised for equivalent material by many people.
http://www.ourmetals.com/index.php?cat=20&subcat=186&c=england&t=06&mode=steel_grade2006

Regards
Sachin.Sankhe




--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

Comments

Post a Comment

Popular posts from this blog

Heat tint (temper) colours on stainless steel surfaces heated in air // Heat tint

By Materials & Welding
Introduction The colour formed when stainless steel is heated, either in a furnace application or in the heat affected zone of welds, is dependent on several factors that are related to the oxidation resistance of the steel. The heat tint or temper colour formed is caused by the progressive thickening of the surface oxide layer and so, as temperature is increased, the colours change.   Oxidation resistance of stainless steels However, there are several factors that affect the degree of colour change and so there is no a single table of colour and temperature that represents all cases. The colours formed can only be used as an indication of the temperature to which the steel has been heated. Factors affecting the heat tint colours formed Steel composition The chromium content is the most important single factor affecting oxidation resistance. The higher the chromium, the more heat resistant the steel and so the development of the heat tint colou...
Post a Comment
Read more

Materails FAQs

By Materials & Welding
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...
21 comments
Read more

The Schaeffler and Delong diagrams for predicting ferrite levels in austenitic stainless steel welds

By Materials & Welding
Introduction Ferrite is important in avoiding hot cracking in during cooling from welding of austenitic stainless steels. 'Constitution diagrams' are used to predict ferrite levels from the composition by comparing the effects of austenite and ferrite stabilising elements. The Schaeffler and Delong diagrams are the original methods of predicting the phase balances in austenitic stainless steel welds. Nickel and chromium equivalents A 'nickel equivalent' is calculated for the austenite stabilising elements and a 'chromium equivalent' ferrite stabilising elements. These are used as the axes for the diagrams, which show the compositional equivalent areas where the phases austenite, ferrite, martensite (and mixtures of these) should be present. Although intended to show the phase balance of weld fillers, these diagrams can also be used to illustrate the phase balance of the 'parent' material. There are different diagrams for dif...
Post a Comment
Read more