[MW:983] FW: 982] RE: 981] FW: 978] RE: 974] RE: 971] RE: 970] Consumable For UNS31254weldoverlay on SA516 Gr. 70
-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of Bathula Raghuram
(Mumbai - PIPING)
Sent: 29 July, 2008 9:10 AM
To: materials-welding@googlegroups.com
Subject: [MW:982] RE: 981] FW: 978] RE: 974] RE: 971] RE: 970] Consumable
For UNS31254weldoverlay on SA516 Gr. 70
Please note there is a difference in UNS# S32654 and UNS# S31524, you
are using 654SMO and the other one is 254SMO (what we are discussing
here)
-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of
mathu.subramanian
Sent: Tuesday, July 29, 2008 11:01 AM
To: materials-welding@googlegroups.com
Subject: [MW:981] FW: 978] RE: 974] RE: 971] RE: 970] Consumable For
UNS31254weldoverlay on SA516 Gr. 70
Dear Friends,
We are fabricating Evaporator Sump having base material of UNS S32654
for
the Canadian Vessel Manufacturer. With their recommendations only we are
using ENiCrMo-10.
Regards,
S.Mathusoothanan
-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of Abby Joseph
Sent: 29 July, 2008 6:51 AM
To: materials-welding@googlegroups.com
Subject: [MW:978] RE: 974] RE: 971] RE: 970] Consumable For UNS31254
weldoverlay on SA516 Gr. 70
Dear All,
Just to add further to this,
Avesta P12-R Basic (ENiCrMo-12) is best suited for welding UNS S31254.
The
Avesta P16 Basic electrode confirms to ENiCrMO-13 and is specifically
designed for welding 654SMO (UNS S32654) grades.
Regards,
Abby Joseph
-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of Bathula
Raghuram
(Mumbai - PIPING)
Sent: 28 July 2008 09:57
To: materials-welding@googlegroups.com
Subject: [MW:974] RE: 971] RE: 970] Consumable For UNS31254 weldoverlay
on
SA516 Gr. 70
UNS31254 is similar to Type 254SMO of Avesta polarit; you may contact
them for their recommended combination (Avesta P16 or P12-R basic etc.)
ERNiCrMo-3 (AWS Specification A5.14) or ENiCrMo-3/ ENiCrMo-12 (AWS
Specification A5.11) can be used for depositing, depending on the
process you may choose. E309LMo also can be used for barrier layer.
Avestapolarit has 805 flux which can be used in case of SAW
Sandvik also got similar combination such as Sanicro60 etc...
For strip cladding Soudokay has got some combinations, such as
Soudotape625 with flux NFT201/EST201 (refer their catalogue)
-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of
mathu.subramanian
Sent: Sunday, July 27, 2008 9:47 AM
To: materials-welding@googlegroups.com
Subject: [MW:971] RE: 970] Consumable For UNS31254 weldoverlay on SA516
Gr. 70
Dear Friend,
You can use ER NiCrMo-10.
Regards,
S.Mathusoothanan
-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of Romio
Sent: 26 July, 2008 3:15 PM
To: Materials & Welding
Subject: [MW:970] Consumable For UNS31254 weldoverlay on SA516 Gr. 70
Has anybody experienced UNS31254 (P No. 8 Gr. 4.....chemi..20Cr 18Ni
6Mo) weldoverlay on SA516 Gr. 70
Can someone suggest the correct AWS class? If u can suggest the STRIP
consumable supplier for the smae it will be handful....
Romio
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---
Comments