Dear Mithleash
To avoid conflicts Need to discuss the same with client if needed up to end user for acceptance,
All the parties should agreed for the test to be conducted, and its acceptance limits, since some time client specification has some stringent requirements,
Regards
Sathiyanarayanan
7358752505
On Tue, 26 Jul, 2022, 10:22 am mithlesh kumar, <mithleshmech47@gmail.com> wrote:
Dear Expert,we have some pipes of 316 material all pipes are off cut and heat identification is not available on these pipes. MTC type requirement is 3.2 also we have not MTC. what is the Procedure to certify the material as per the 3.2 type requirement?--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/c083e4ed-c02a-49dc-b2a4-c3d8c8c8c738n%40googlegroups.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzo-ku0gn5cqoBKuSc2hunyGkpWKYHmwi_aHG%3D0SQ%3DXZo1pOA%40mail.gmail.com.
Comments