Saturday, July 30, 2022

[MW:33324] Need support for gas cutting and welding ,shot blasting and painting costing.

Dear All Experts
Please help me ,I want to do actual costing (for arc and CO2 welding)of gas consumption,electrode consumption,CO2 wire consumption.If have any data please share. .
Regards
Sachin 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOsVSySZ_ckO8Bw6Z%3DgS0Yaozo7mJF-cQqiHmfJ4rvu_3K8NZg%40mail.gmail.com.
By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:35737] Bend Test and Tensile Test failed for ET45 Micro Welded Coupon

Hi As its %elongation is very low  Better try buttering on jt surrace with ductile consumable like pure Ni i. E Ni1 And later weld jt with c...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...