Re: [MW:33315] Pickling and passivation need before painting SS surfaces

Dear Experts

Thanks all for very valuable support. 

There is an overlay welding involved in the body seat of the valve. Do we need pickling and passivation inside only in this case?

Outside there will be painting. 

Regards

Anilkumar

On Thu, Jul 28, 2022 at 9:18 AM Kannayeram Gnanapandithan <kgpandithan@gmail.com> wrote:

Sweep sand blast and do painting, Pickling & Passivation not required

THANKS & BEST REGARDS,

KG.PANDITHAN, BE, IWE,  CSWIP 3.1,

ISO 9712 Level 2 in VT,

ASNT-Level II in PT,MT,RT & UT,

LA ISO 9001-2015,

International Welding Engineer. 

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

On Thu, Jul 28, 2022 at 8:55 AM Sudhakar Kuppuswamy <sudhakarceng@gmail.com> wrote:

If the painting is applicable , picking and passivation is not required.

Regards,

Sudhakar K 

On Tue, 26 Jul 2022 at 12:19 PM Anilkumar G <akg.nitt@gmail.com> wrote:

Dear Experts

Do we need pickling and passivation of SS surfaces before painting them? Could you please suggest any specification relevant this requirement?

The parts are SS cast valves requiring painting.

Regards

Anilkumar

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/754e0d61-54e1-420e-ae4b-f92593266f5en%40googlegroups.com.

--

Regards,

Sudhakar K CEng MWeldI,IWE.

Welding & Metallurgical Engineer,

Email: sudhakarceng@gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CABF8NYWeTdW37oKU%2BwEVKNmUahae9_1vrYA5XfvizQou11HzYg%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eP86mvMhpBPm_vf5H4P2nq_pqXfkT5gS3tCd8vAcF0sdw%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKMJiNVymuU1embz2s-Yt%3DQfW9pzALNx%2BVH-oh%3DY4cKqzHTvEQ%40mail.gmail.com.