Re: [MW:33211] Toque Range Chart - Stud & Nuts

Dear Sir,

Consider my reply marked in blue

Williams,

What is it that you are bolting? - Flange End Pipe Spools (Photo attached below)

Flange Type - WNRF & RTJ 

Plated or unplated?  - Unplated 

Lubricated? Type? K factor? - Stud & Nut - Mill Test certificate is attached below FYR

Gasket type? - SPW & Rig Gasket

Are you trying to achieve maximum amount of tightness shy of reaching the yield of bolting material? Or sufficient amount of compression/clamping on a specific type of gasket material? 

Thanks,

Chip Frizzell 

Quality Manager 

CWI / ASNT NDT LVL III / CRI / NACE CIP LVL 2-Certified

Chipfrizzell@gmail.com

CELL: 520-510-8093

Price is what you pay-value is what you get. 

Seldom does the lowest price result in the best value!

Sent from my iPhone

On Jul 6, 2022, at 1:56 AM, williams p wilson <williamswilsonp@gmail.com> wrote:



Dear Experts,

If anybody has the Torque range chart for Stud & Nuts - Please share.

Material - ASTM A 193 B7  & ASTM A 194 Gr.2H

Thank You & Regards

Williams P Wilson

QA/QC Engineer

Welding Inspector (CSWIP 3.1)

Cell: (+968) 94600828

P Please consider the environment before printing this message

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHBxnQ4pbFpz%3D3E9oM-Hp%2B4%3DzVrTBrWPjFC4NxSds1fp%2BJTt2Q%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/8D41DED6-1F78-4FCC-98C9-E11559BCA2C4%40gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHBxnQ7bQex33YOhheV2kOvGcS1QS%2BV--NKNyGxWSXLe9O7xqg%40mail.gmail.com.