SMAW & SAW no Pulsing.
Only GTAW & GMAW pulsing.
It depends on your Machine capability in adjusting the below.
Peak current & Time
Background Current & Time
Upslope & Downslope
Thanks & Regards
J.Gerald Jayakumar
On Wednesday, 20 July, 2022 at 12:22:37 pm GMT+4, madheswaran s <madhes.sss@gmail.com> wrote:
Dear Experts,
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/36fd9ece-5234-42e9-b1e1-fd3900b1d214n%40googlegroups.com.
What to write the in the wps , where pulsing current ------- mentioned
iF i use SMAW process in wps pulsing current -------
iF i use GTAW process in wps pulsing current -------
iF i use SAW process in wps pulsing current -------
iF i use GMAW process in wps pulsing current -------
What to write for each procss ,
Can one one tell the answers as mentioned avove.(Applicable/not applicable/none/yes etc.)
Thanks.
Madheswaran.S
-- https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/36fd9ece-5234-42e9-b1e1-fd3900b1d214n%40googlegroups.com.
No comments:
Post a Comment