Re: [MW:33257] Additional Joint

Dear Mr.Matheswaran,

Find the reply for your questions:

pulse current is applicable to GATW & GMAW only not for SMAW & SAW process.

type of current - AC or DC with pulse or without pulse 

typr of polarity : DCEP or DCEN

Regards,

Sankaran.SP

Coimbatore, India. 

On Saturday, 16 July, 2022 at 06:34:48 pm IST, madheswaran s <madhes.sss@gmail.com> wrote:

Dear All, I have one doubt, 

in wps there is a line Pulsing current --------in the format. If i prepare new wps , what to write there -- if I process SMAW? IF process GTAW, IF process SAW, IF process GMAW? can i one tell for each process.

On Fri, 15 Jul 2022 at 11:43, Vishwas Keskar <vvkeskar123@gmail.com> wrote:

 Hope this is Carbon steel dished end.

First discuss with Design Engineering about this  chordal joint in dished end.

Then locate the joint based on plate width.

Get the drawing.

Check with Dished end forming expert , Is this dished end is  cold forming or hot forming. 

Based on forming Method,  select WPS.

Finalise proposal in consultation with 

Methods Engineering, Design Engineering,  QA and Manufacturing. 

Accor. prepare QAP  Method statement  and circulate to Mfg as per ISO issue document 

Vishwas 

IWE -

International Welding Engineer

On Fri, 15 Jul 2022, 11:29 CKML, <chaitanyakamal@gmail.com> wrote:

Dear Experts 

 Can i proceed forming of 30 mm thk Plate by joining of 2 Plates for  Lower shell dish end.

If cant what would be the acceptable of joining length of plates.

If yes what precaution to be take care.

Any reviews 

can any one help me 

Regards

chaitanya kamal 

ph-8226081506  

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/57bd9e9a-da16-4e1c-ba2b-dc806d01205bn%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADder3ODHZpqRtJfyJiYERMRfAefyAOE_-U%3DF2VXZDxvwE5-5A%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALUa47huqUY8ih7DRehEEri4797kZ1EiCRg%2Bt5FWZ0ZtPhe5ZA%40mail.gmail.com.