Re: [MW:33202] FILLER FOR UNS8800 TO SS304

Dear Sujith, 

you are recommended  to use below consumables  

i.e  ENiCrFe-2, -3 (SMAW)   & ENiCrFe-2 or -3  or  ERNiCr-3( for GTAW)

Regards 

Srinivas Rao 

On Wed, Jul 6, 2022 at 10:35 AM sujit kumar <sujitkumar19942@gmail.com> wrote:

Dear experts,

Good morning all.

Which filler wire is suitable to weld for UNS NO 8800 .. and which filler wire is required to weld SS304 to UNS NO8800.....Please guide me.

Thanks and regards.

sujit kumar

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/f733a856-cf75-4d6b-8c29-441a4baab2fbn%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHdRSOPaP2gbMpQGLAgLyq9Urz68%3DDUh9fS6roSuVGKhdCCLiQ%40mail.gmail.com.