Welder qualification range is independent of thickness range of WPS s.
-- What is his weld metal deposition qualification
GTAW ___mm??
SMAW __mm??
On Thu, 14 Jul 2022, 13:18 QA/QC, <adnanziad49@gmail.com> wrote:
Dear Expertsi have two wps's for piping cs/ltsc welding with the asme b31.3 ans sec 9 one thickness range is 3 to 20 mm and the second is 20.01to 31.22 pwht requiered .the two is GTAW+SMAWi have a welder qualify in test coupon 6'' 14.27 mmmy question is this welder will qualify to weld in the two wps or we should make another qualification for him seperately--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/083762d2-dd64-482a-85e9-0e4f7aa4e14bn%40googlegroups.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADder3P0oXvwk645wv4SsUdJfwqRyPNSg7raKpXV-4sAVaK_VA%40mail.gmail.com.
No comments:
Post a Comment