yes. deletion is the essential
THANKS & BEST REGARDS,
KG.PANDITHAN, BE, IWE, CSWIP 3.1,
ISO 9712 Level 2 in VT,
ASNT-Level II in PT,MT,RT & UT,
LA ISO 9001-2015,
International Welding Engineer.
CONSULTANT-WELDING & QUALITY
Mobile no: +919940739349
On Fri, Jul 22, 2022 at 11:09 AM madheswaran s <madhes.sss@gmail.com> wrote:
Yes u can ...--Sent from my iPhoneOn 22-Jul-2022, at 10:44 AM, sujit kumar <sujitkumar19942@gmail.com> wrote:Dear experts,--We have Qualified WPS Sa516 grade 70 with GTAW +SMAW with out back gouging.........my Question is can we weld a plate with Back gouging..??Best RegardsSujit kumar
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAFonYWNf2qnd--LWzua4jkGTd2qggp_sOui5JnMX6UWbT6RGSw%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/0A104ACF-B754-4015-A3A2-DFBC3935DAEC%40gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eObfX_EdWL%2BBk1LEQKPivo8PGq7D-Q%2BCViOG17fvURhHA%40mail.gmail.com.
No comments:
Post a Comment