Pl ref QW 451 for base metal and weld metal. Hope that u agree with base metal thickness ( T) range. For weld metal (t) thickness range is as follows, if deposited weld metal thickness is less than 19mm, then range is 2t. And deposited weld metal equal or greater than 19mm, then thickness range is 200mm. Thanks
On Sun, 31 Mar 2019 7:56 pm George Dilintas, <dilintas@gmail.com> wrote:
you are confusing the base metal thickness range and the deposited thickness range.Those are two distinct essential variablesΣτις Σάβ, 30 Μαρ 2019 στις 6:59 π.μ., ο/η Nabeel <khan.nabeelahmed@gmail.com> έγραψε:--I have reviewed a PQR for GTAW+SMAW welding. Test coupon is 50mm thick with GTAW 25mm and SMAW 25mm welding. On the WPS thickness range is given as upto 200mm for both GTAW and SMAW.How is this possible as more than 38mm test coupon qualifies for up to 200mm welding ??
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
----Dr. Georgios Dilintas,Dipl. Ing. In Aeronautic and Space EngineeringPh.D in Mechanics of Solids - Computational MechanicsA.I.S, A.N.I, IRCA Lead AuditorWelding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment