There are multiples way for the joining of aluminized or andoised steel only the process varies.
-- 1. You can go for brazing and no need to remove the aluminium layer
2. If joining with GTAW, you need to pre-remove the AL layer in the welding areas.
With your question, I am not sure about the
1. Coating thickness
2. Type of joint
3. Joint requirements or purpose of performing the welding
Thanks & regards
Sandeep Kumar
On Tuesday, March 26, 2019 at 5:28:56 AM UTC+3, Hrushikesh Sangamnerkar wrote:
On Tuesday, March 26, 2019 at 5:28:56 AM UTC+3, Hrushikesh Sangamnerkar wrote:
Dear experts,Does anyone has experience in welding aluminized stainless steel?Grade is SS 347If Yes, pl shareIf No, share the reason
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment