See attached
Thanks and regards
Hisham Almetwally
QA/QC Mechanical Engineer & Welding Engineer
Mob: +971564337326 & +971526679935
Hisham Almetwally
QA/QC Mechanical Engineer & Welding Engineer
Mob: +971564337326 & +971526679935
On Sat, 23 Mar 2019, 4:23 pm 'Ibrahim Ramadan Hassan' via Materials & Welding <materials-welding@googlegroups.com wrote:
This message is eligible for Automatic Cleanup! (materials-welding@googlegroups.com) Add cleanup rule | More info
--Dear SirI am inquire about the Welders qualification test as Per ASME IX - QW-302 & QW-304If I make WQT for qualification of (2) welders welding together in one test Pipe 12 " inchhence the total circumference of Pipe 12 " inch = 957 mm so, Each welder will weld more than 150 mm as required by ASME IX And all the Pipe Circumference welded by each welder will be radio graphed.Is that Acceptable is or not to qualify 2 welders in one test piece (Pipe 12" inch)?Kindly reply on my inquiry.Best Regards
Eng. / Ibrahim Ramadan Hassan
Section Head Mechanical QA/QC
PETROJET - Jordan Branch
Egypt Mob. : 00201000948366
Jordan Mob. : 00962791023621
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment