Cost and low productivity. So change to semi-auto or auto process.
Bien ND
Sent from my Blackberry
| From: George Dilintas Sent: Tuesday, March 26, 2019 09:29 To: materials-welding@googlegroups.com Reply To: materials-welding@googlegroups.com Subject: Re: [MW:29375] TIG welding limitations in Structural |
because it is expensive
Στις Τρί, 19 Φεβ 2019 στις 12:48 μ.μ., ο/η Dinesh Somwanshi <som.din@gmail.com> έγραψε:
Dear sir,--Looking for advice why TIG welding not using for structural welding generally.Please advice ahead.Thanks & RegardsDINESH VITTHAL SOMWANSHI
BACHELOR IN MECHANICAL ENGINEER
Skype = dinesh somwanshi
असो द्यावी दया तुमच्या लागतसे पाया.
*Pray for others, sometime, You might never need to pray for yourself
again.....*
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
Dr. Georgios Dilintas,
Dipl. Ing. In Aeronautic and Space Engineering
Ph.D in Mechanics of Solids - Computational Mechanics
A.I.S, A.N.I, IRCA Lead Auditor
Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment