Re: [MW:29316] RT Sensitivity Not Achieving for Pipe 1 1/2 " Sch 40

Vikram, 

Use D4film without lead screen. Exposure time will increase more than double. Gamma ray 

Regards, 

S.SENTHILKUMAR 

Sent from Yahoo Mail on Android

On Tue, 19 Mar 2019 at 7:33, vikram saipogu

<saipoguvikram@gmail.com> wrote:

Dear sir,

Thanks for your immediate response

We have tried using D4 Film & Increased SFD also,

but still the issue remains the same.

Regards

Vikram Saipogu

On Tue, Mar 19, 2019, 11:17 AM Paresh Patel <pkpatel1968@gmail.com> wrote:

Try for fine grain/ slow film, use low Curie source.

On Mon 18 Mar, 2019, 9:24 PM vikram saipogu, <saipoguvikram@gmail.com> wrote:

Dear All,

Please provide me some suggestion,

How shall I achieve sensitivity for lower thickness and lower diameter pipe using Gamma Rays i.e Iridium 192 ?

Client requirements is Radiography by Gamma Rays 

Thanking you

Best Regards,

Vikram Saipogu

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.