Re: [MW:23717] Impact test- minimum thk requirement

For this diameter and thickness, it is not possible to perform  impact test.

2013-05-22 14:33 GMT+04:00 victor george <dvgeorge@gmail.com>:

Hi Experts,

 

Please explain what is the minimum thickness requirement of impact test.

 

Material: A790 S31803 pipe

Size: 1/2' Sch 80 (WT- 3.73mm)

Sour service

 

 

Question: Is it possible to do impact test on 3.73 thk?

 

 

Best Regards,

DV.George

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

--

Regards,

Mr. Harish.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAE4SttGWP4%3DOmSDzBUdE40NphU_M-FFBnRoNcOWJth%3D77G7JxA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.