Re: [MW:23720] Leak test for HSD Fuel Tank

Dear Winarko,

You can conduct pneumatic test if only for leak test, but must be concerned to pressure not too high. Also difficult for find leak point (yo can use soap in water).

Best regards

Thaikyy

On Tue, Oct 13, 2015 at 4:57 PM, pras ari <alhanif.pras@gmail.com> wrote:

Dear Sir,

Please advise me about leak test (hydro-test) of HSD Fuel Tank, I have 2 (two) tank with capacity 1400 KL, We will held Leak test but but site condition and around very difficult to get water as much as 2800 kilo liters.

Is any method for substitute leak test? may be NDT or pneumatic test?

Thanks & Regards

Winarko

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMoAFwrSgBgmU-%3DZKEuaK_YigrM5eBnzrYfTHsyrm%2BUvMSuYcg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAK7S45snbRf57jdt_paRsXsMLHn%2BM90vzuVfb1MOg4Y0o5-fpg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.