Wednesday, October 28, 2015

Re: [MW:23817] PWHT as per ASME B31.3-2014



On 28 October 2015 at 12:27, Himan Nikdin <himan.nikdin@outlook.com> wrote:
Dear Sir

Thanks indeed for your quick reply, meanwhile this link"http://www.absa.ca/IBIndex/IB15-008.pdf" does not work any more, would you please send me this PDF file.

Regards,
Himan Nikdin


Date: Wed, 28 Oct 2015 01:04:38 -0700
From: raghurambathula@gmail.com
To: materials-welding@googlegroups.com
Subject: [MW:23815] PWHT as per ASME B31.3-2014

pl. read the link

https://groups.google.com/forum/#!searchin/materials-welding/B31.3$2BPWHT/materials-welding/C7TRV2zg3Bk/6OR-EMAiCAAJ

On Wednesday, 28 October 2015 11:51:28 UTC+4, Himan Nikdin wrote:
Dear Experts,
Good Day!!
I have a query regarding PWHT requirements as per ANSI B31.3-2014.
As referred in table 331.1.1 all P.No 1 material shall be subject to PWHT regardless thickness and in table 331.1.3 exemptions to mandatory PWHT mentioned which providing 95ÂșC preheat applied on material with nominal thickness over 25mm, PWHT can be exempted.
Does it mean "for material with nominal thickness less than 25mm, PWHT is not mandatory"?

Appreciated if you share your valuable ideas.

Regards,
Himan Nikdin



--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADxVubnHGGhjMM8Vv-9vYgJqNPh4XeQM5LaxR4%2BC5fD6LDNTKg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...