Thank you for the answers,
I agree with your answer that commonly MT is done after PWHT.
But in some condition MT shall be done before PWHT,
Still looking for this condition? In which CODE
Thanks,
Urdi
On Monday, October 19, 2015 at 1:11:25 PM UTC+7, kannayeram gnanapandithan wrote:
code does not say before or after for sec 8 construction, but it is good engineering practice to MT before and after for P1 materials. As far as B31.1 power piping u have to do NDE after PWHT for materials P3,4,5,15ETHANKS & BEST REGARDS,KG.PANDITHAN, IWE, AWS-CWI, CSWIP 3.1,CONSULTANT-WELDING & QUALITYOn Mon, Oct 19, 2015 at 7:11 AM, Urdiansyah <urdia...@gmail.com> wrote:--Dear Expert,
Currently I work at fabricator of Pressure vessel and Heat exchanger,
During Renewal ASME, AI question about MT shall be done before or after PWHT ?
Kindly advice for this matter
Thank you for answered,
Best Regards,
Urdiansyah
Engineering PIC
PT.Daekyung Indah Heavy Industry
Cilegon Plant :
Jl. Australia II Kav. K1 Kawasan Industri (KIEC)
Cilegon 42443, Banten - INDONESIA
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com .
To post to this group, send email to material...@googlegroups.com .
Visit this group at http://groups.google.com/group/materials-welding .
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/ .4c4f5ad7-fc11-4d20-a7c3- 0ac84044a3b2%40googlegroups. com
For more options, visit https://groups.google.com/d/optout .
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/7e5197b1-130b-4ffe-831e-6909a9be84ab%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment