[MW:23760] PTC(Production Test Coupon) Requirements.

Dear Sir/Experts,

We are going to the manufacturing the Sphere for Liquid/unsaturated LPG.Design Code ASME Section -Vlll Div-2, design temperature -34 deg centigrade. Materials are impacted tested at  -34 deg centigrade wıth simulated heat treatment. condition.

I have doubt regarding PTC. As per Section Vlll Div-1 if materials are under impact tested in that case PTC is mandatory. 

But as per ASME Section Vlll Div-2 it is required or not please advised me with supporting clause/documents.

--

Thanks & Regards
Pinaki Boxi.
*Manager QA/QC*
*ARP Project Site, Turkey*
*Mob :- +905351054384.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOt02TCwCpbYde3uSevpac%3D8m-HSVO4MdP62%3DQ8D7nvHp6Tnhg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.