Re: [MW:23808] Re: Weld Repair Procedure as per API 1104

Dear Waqas,

It is not mandatory to qualify a repair WPS & PQR as per API 1104.

However, as a good construction practice it is better and advisable to establish and qualify the repair WPS & PQR as you don't expect all weld joints to be 100% defect free. Secondly, if you find any defect in any of your weld joints then will you be going for complete weld joint cut out instead of repairing only the required defective area.

Regards,

PARAG PANSARE

On Oct 24, 2015 5:59 PM, "waqas suleman" <waqas.suleman@gmail.com> wrote:

Dear JUJULAL,

Thanks for your comment, but my question is, is it Mandatory requirement to qualify separate Weld Repair Procedure Qualification.

On Thu, Oct 22, 2015 at 9:05 PM, waqas suleman <waqas.suleman@gmail.com> wrote:

Dear Members,

We qualified Welding Procedure on API 1104, now our Client is demanding Weld Repair Procedure Qualification.

In scope Weld Repair Procedure Qualification is not mentioned.

I need expert judgement that is it mandatory to qualify Weld Repair Procedure for each welding procedure in API 1104.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKhANKiBqDKiJBNZ%3DtCB5R2fb1XVA%3DqHOnM0z8x69aYkYm3m%2BQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHB_ypCYOE5Lsy%3DnaZLpJYvHf-A6mobsOowui9vDNesTCdZgsg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.