Re: [MW:23783] Vessel Design Temperature Change

Get in touch with a R stamp holder and apply for rerating/alteration

Sent from my BlackBerry 10 smartphone.

From: Praphulla Phirke Sent: Παρασκευή, 23 Οκτωβρίου 2015 - 11:11 To: Materials-Welding Reply To: materials-welding@googlegroups.com Subject: [MW:23779] Vessel Design Temperature Change

Dear All,

I have situation where Air Receiver Vessel made of SS 316  designed as per ASME SEC VIII DIV 1 U stamped shipped to site but not yet installed. The vessel is stored on warehouse in packed condition.

 

The Present design temperature is 70°C which need to be changed to 85°C.

 

Can you please suggest which are steps we have to take ? Any code reference for recertification ?

 

Regards

Praphulla

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/341D89B8-0E22-4517-AE8D-5DD65D81A0F5%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com