Re: [MW:23736] Impact Test Requirement for Welds of API-650 Storage Tank when Design Metal Temperature is below -7°C

First of all, ASME SEC.IX does not say about requirement/exemption for impact test.

As per QW-170 of ASME SEC.IX, requirement of impact test, acceptance criteria, specimen requirement etc. are in  accordinance with other code section that require impact test.

In your case if design code API-650 ask for impact test & if welding procedures to be qualified as per ASME SEC.IX then all procedures should be qualified with impact test considering all essential & supplementary essential variables for each welding process.

On 17 Oct 2015 13:27, "SA" <sarfrazengineer@gmail.com> wrote:

Dear All,

A Fuel Oil tank has been designed as per API-650 code and it is mentioned in this code that when design metal temperature is below -7°C impact test shall be carried out for all welds for all components. The statement in code is given as: 

"9.2.2.2 When the design metal temperature is below -7°C (20 OF), impact tests of the weld metal shall be made for all procedures used for welding the components listed in 4 2.10 1, for welding attachments to these components, and for fabricating shell nozzles and manholes from pipe and forgings listed in 4.5. 

In our case, design metal temperature is below -7°C i.e. -10°C but still welding engineer is insisting that impact testing is not required as per ASME Section IX (QW-403.5).

My question is that Tank is designed as per API-650 and there is no reference that ASME section IX would supersede  the above statement of API-650 where impact testing shall be carried out when Design Metal Temperature is below -7°C.

Can anybody guide on this subject.

Thanks in advance

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/b751b08a-e0c5-4b0d-8b76-34555fc91bcd%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKHZGHr8FeKp7P9C5KmF0Op8eocNcU8ECHOSocU_LMvxp4G63A%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.