Materials & Welding: Re: [MW:23355] Minimum diameter to allow the required nos of tes

Thursday, August 27, 2015

Hi,

Please refer QW302.2 = ASME Section IX

Thanks & Regards,

(Karthik)

On Thursday, August 27, 2015 11:10 AM, pradip kumar Sil <pradipsil@gmail.com> wrote:

Dear All,

For small bore welder test ,Minimum diameter to allow the required nos of test coupon.

Where in Sec IX is stated how much circumference to cover to weld for small bore ( Example 1/2 ") for welder qualification.

Regards

Pradip

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAB%3DAs8m4EWmm30%3Dru01%3DD0U4uVSLXvzkFjpj8by8LQux4mXOkw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Materials & Welding