Re: [MW:23320] Environment condition during welding

Hi Prabha,

Please refer to any Welding consumable manufacturer's Handbook or Data sheet.

Typical example from ESAB shown below.

Based on the Relative Humidity, welding electrode and Flux storage room temperature shall be no colder than 5degC below the air temperature.  For example if the Relative Humidity is 50% measured, then the electrode storage room temperature  shall be no colder than 10 degC below the Air temperature.

 

Thanks & Regards

J.Gerald Jayakumar

0091-9344954677

---

From: Prabha Karan <prabha.ican@gmail.com>
To: materials-welding@googlegroups.com
Sent: Thursday, August 20, 2015 1:21 PM
Subject: [MW:23318] Environment condition during welding

Hi all.   Can any one share the environmental condition in welding ..particularly relative humidity... We have to maintain the relative humidity for flux and electrode..during welding anything?  By prabha

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALMEwnZ32uH_wbVsxKqqesQMr20WxrFKbxUKacVP5DJK_OEtdg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.