Dear Sir,,
I have one PQR with 3 mm GTAW weld deposit and 6.5 mm SMAW deposit. Base metal thickness is 9.5 mm and impact is not required.
Please correct me if any of the following is NOT correct as per Sec IX
1) Combined Process (GTAW + SMAW) up to a thickness of 1.5 to 19 MM (2T)
2( Single process wps of SMAW with weld metal thicjness 13 MM and qualified base metal thickness is 1.5 mm to 13 mm
3) Single process WPS of GTAW with weld metal thickness of 6 MM and Qualified base metal thickness is 1.5 to 6 mm
Please help!!
Riaz
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/b3a24345-befb-4d5c-b65a-9cfc47a53889%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment