Thursday, August 20, 2015

Re: [MW:23319] Pre-heat & pre heat maintenance

Plzz refer ASME IIC, SFA 5.5, Table-7

Regards,
Dharmendra KL
BVIL

On Thu, Aug 20, 2015 at 1:31 PM, <george.dilintas@gr.bureauveritas.com> wrote:
The preheat method is not specified in the ASME Code. It is a matter of sound engineering practice

Sent from my BlackBerry 10 smartphone.
From: pradip kumar Sil
Sent: Πέμπτη, 20 Αυγούστου 2015 - 10:29
To: materials-welding
Subject: [MW:23316] Pre-heat & pre heat maintenance

 Dear All,
Is there any code requirement for  ASTM A335 Gr P-22 material before welding & pre heat maintenance by resistance coil ( For uniform pre-heating  pre heat maintenance ) for power piping
Regards
Pradip

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAB%3DAs8%3D9-XJZDRE%3DEbGUK20dAiDuz5igd5j9mg%3Dkgnoj1wCEyw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/20150820080155.6459476.92630.12530%40gr.bureauveritas.com.

For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CABxZsvY6%3D16b%2BsVPTCPxhbExyDoiBF5Ey8e4EBZ4tq%3DD1zNLKg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...