Tuesday, August 18, 2015

[MW:23306] Brass versus Bronze as an Alloy for High chlorine service


Dear Sirs
In our Project, fire water valves and hydrants are generally specified as SS-316 because of their high ability to resist pitting resistance in Chlorine environment. However the client is insisting to use either Brass or Bronze as MOC for all Valves internals. Kindly guide me which is more superior Brass or Bronze in terms of its resistance to SCC, weldability and other issues
Supporting references for the above would be helpful

Regards
Arunabh
Project Co-ordinator
Engineers India Limited

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/95a4570e-daed-4d7b-9dd7-078ab6a7c37d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...