Thursday, August 6, 2015

Re: [MW:23274] Multiple WPS from single PQR

Backing is a welders qualification essential variable. For PQR it is a nonessential one.
The Base metal qualification range is the same for the 3 cases

Sent from my BlackBerry 10 smartphone.
From: 'Bijay' via Materials & Welding
Sent: Πέμπτη, 6 Αυγούστου 2015 - 09:55
To: materials-welding@googlegroups com
Reply To: materials-welding@googlegroups.com
Subject: Re: [MW:23273] Multiple WPS from single PQR

But for SMAW single process you have to give Metal baking as the GTAW weld Metal act as metal baking.

Sent from Yahoo Mail on Android


From:"Ri@z" <riaz.rafeeque@gmail.com>
Date:Thu, 6 Aug, 2015 at 11:58 am
Subject:[MW:23271] Multiple WPS from single PQR



Dear Sir,,


I have one PQR with 3 mm GTAW weld deposit and 6.5 mm SMAW deposit. Base metal thickness is 9.5 mm and impact is not required.

Please correct me if any of the following is NOT correct as per Sec IX

1) Combined Process (GTAW + SMAW) up to a thickness of 1.5 to 19 MM (2T)

2( Single process wps of SMAW with weld metal thicjness 13 MM and qualified base metal thickness is 1.5 mm to 13 mm

3)  Single process WPS of GTAW  with weld metal thickness of 6 MM and Qualified base metal thickness is 1.5 to  6 mm




Please help!!

Riaz 

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/b3a24345-befb-4d5c-b65a-9cfc47a53889%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1438843327.97025.YahooMailAndroidMobile%40web181301.mail.ne1.yahoo.com.
For more options, visit https://groups.google.com/d/optout.

This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...